Acceptance standard for outdoor full-color LED display screen
Nov .17.2025
pandangan
1, LED display color reproduction refers to the color reproduction of the display screen, that is, the color displayed on the display screen should be highly consistent with the color of the broadcast source to ensure the realism of the image.
2. The colorless color block of LED display screen means that there is obvious color difference between adjacent modules, and the color transition is based on modules. The color block phenomenon is mainly caused by poor control system, low gray level and low scanning frequency.
3. Does the LED display screen have mosaics? Dead-spot mosaics indicate the small squares on the display screen, which are always bright or black. It is not only the phenomenon of module necrosis, but also the quality of connectors used in the display screen is not up to standard. Dead spots refer to a single point that is always bright or black on the LED display screen, and the number of dead spots is mainly determined by the quality of the die.
4, flatness The surface flatness of the LED display screen should be within 1 mm to ensure that the displayed image is not distorted. Local protrusions or depressions will lead to dead angles in the viewing angle of the display screen. The flatness is mainly determined by the production process.
5. The brightness of LED display screen and viewing angle of indoor full-color screen should be above 800cd/m2, and the brightness of outdoor full-color screen should be above 1500cd/m2 to ensure the normal operation of the display screen, otherwise the displayed image will not be clear because of low brightness. Brightness is mainly determined by the LED die. The viewing angle directly determines the audience of the display screen, so the bigger the better. The viewing angle is mainly determined by the packaging mode of the die.
White balance effect of LED display screen White balance effect is one of the most important indicators of display screen. In color science, only when the ratio of red, green and blue is 1:4.6:0.16 will pure white be displayed. If the actual proportion is slightly deviated, the white balance will be deviated. Generally pay attention to whether white is blue or yellow-green. The white balance is mainly determined by the control system of the display screen, and the die also has an influence on the color reproduction degree.
The above six points are the basic acceptance points of LED display screen and the most direct and comprehensive acceptance direction. Every suitable LED display screen must go through design, production and aging test before it is put into market.
Berita Berkaitan
OLED transparent screen display machine: the new favorite of future technology t
Mar .20.2026
Secondly, OLED transparent screen display machines also have broad application prospects in the automotive industry.
OLED transparent screen display machine: the new favorite of future technology t
Mar .19.2026
With the continuous advancement of technology and people‘s pursuit of innovative products, OLED transparent screen display machines, as a disruptive technology,...
Touch all-in-one advertising display screen machine, making your life more conve
Mar .18.2026
Firstly, the touch all-in-one LCD screen display machine has multiple practical functions.
Touch all-in-one advertising display screen machine, making your life more conve
Mar .17.2026
With the continuous development of technology, touch all-in-one advertising display screen machines have become an indispensable part of modern households.
