Acceptance standard for outdoor full-color LED display screen
Nov .17.2025
pemandangan
1, LED display color reproduction refers to the color reproduction of the display screen, that is, the color displayed on the display screen should be highly consistent with the color of the broadcast source to ensure the realism of the image.
2. The colorless color block of LED display screen means that there is obvious color difference between adjacent modules, and the color transition is based on modules. The color block phenomenon is mainly caused by poor control system, low gray level and low scanning frequency.
3. Does the LED display screen have mosaics? Dead-spot mosaics indicate the small squares on the display screen, which are always bright or black. It is not only the phenomenon of module necrosis, but also the quality of connectors used in the display screen is not up to standard. Dead spots refer to a single point that is always bright or black on the LED display screen, and the number of dead spots is mainly determined by the quality of the die.
4, flatness The surface flatness of the LED display screen should be within 1 mm to ensure that the displayed image is not distorted. Local protrusions or depressions will lead to dead angles in the viewing angle of the display screen. The flatness is mainly determined by the production process.
5. The brightness of LED display screen and viewing angle of indoor full-color screen should be above 800cd/m2, and the brightness of outdoor full-color screen should be above 1500cd/m2 to ensure the normal operation of the display screen, otherwise the displayed image will not be clear because of low brightness. Brightness is mainly determined by the LED die. The viewing angle directly determines the audience of the display screen, so the bigger the better. The viewing angle is mainly determined by the packaging mode of the die.
White balance effect of LED display screen White balance effect is one of the most important indicators of display screen. In color science, only when the ratio of red, green and blue is 1:4.6:0.16 will pure white be displayed. If the actual proportion is slightly deviated, the white balance will be deviated. Generally pay attention to whether white is blue or yellow-green. The white balance is mainly determined by the control system of the display screen, and the die also has an influence on the color reproduction degree.
The above six points are the basic acceptance points of LED display screen and the most direct and comprehensive acceptance direction. Every suitable LED display screen must go through design, production and aging test before it is put into market.
Berita Terkait
Directly hitting the scene: Outdoor P2.976 LED rental screen display machine fac
Jun .04.2026
Color temperature consistency: LED outdoor detachable rental screen display machine controlled within 200K range.
Directly hitting the scene: Outdoor P2.976 LED rental screen display machine fac
Jun .03.2026
Today we will take you deep into the LED display manufacturing workshop to gain a detailed understanding of the quality inspection process of the outdoor P2.976...
High quality LCD splicing screen display machine manufacturers can provide addit
Jun .02.2026
Industry trend sharing: Through deep cooperation with top customers in various industries, high-quality LCD splicing screen display machine manufacturers can ex...
High quality LCD splicing screen display machine manufacturers can provide addit
Jun .02.2026
Core value four: LCD splicing screen display machine lifecycle service and cost optimization
